When you’re running water lines to livestock tanks, setting up irrigation, or plumbing a wash station, you need fittings that won’t let you down. This 1-inch poly street elbow gives you a clean 90-degree turn in tight spaces where a regular elbow and coupling just won’t fit. It’s one of those simple parts that makes the job easier and saves you from having to tear everything apart later.
What You’re Getting
- One-piece design eliminates an extra joint that could leak down the road
- Poly construction won’t rust or corrode like metal fittings in wet environments
- Male threads on one end, female on the other for direct connection between pipes
- Full 1-inch bore keeps water flowing without restriction
- Threads are molded in, not cut, so they seal better and last longer
Built for Real Farm Work
This fitting is perfect for livestock watering systems, irrigation lines, chemical applicators, and anywhere you need to route water around obstacles. The poly material handles the temperature swings and UV exposure that come with outdoor farm plumbing, and it won’t crack in freezing weather like some cheaper plastics.
Made to Last
Banjo makes quality agricultural fittings that hold up to farm use. This street elbow is molded from durable polyethylene that stays flexible in cold weather and won’t get brittle from sun exposure. The threads are precision-molded for a tight seal that won’t work loose over time.
Good to Know
Use pipe thread compound or Teflon tape on the male threads for the best seal. Don’t overtighten—poly fittings seal with moderate pressure, and cranking too hard can crack the threads. If you’re burying this fitting, wrap the connection with electrical tape to keep dirt out of the threads.
