When your steering starts feeling loose or wanders down the road, worn steering linkage is usually the culprit. This front socket is a critical connection point in your manual steering system that takes a beating every day, especially when you’re making tight turns around buildings or working in rough terrain. When these sockets wear out, you’ll notice increased play in the steering wheel and less precise control when maneuvering.
What You’re Getting
- Left hand thread design that prevents loosening during operation
- 0.687 inch diameter construction sized for proper linkage fit
- 4-inch length provides adequate thread engagement for secure connection
- 18 threads per inch for fine adjustment and secure retention
- Built specifically for manual steering applications without power assist
Built for Real Farm Work
This socket fits Ford New Holland tractors equipped with manual steering systems, particularly those utility and row-crop models used for cultivation, hay production, and general farm work. Whether you’re running a 4000 series pulling a disk or a 5000 series with a loader, precise steering control is essential for safe operation and productivity.
Made to Last
The threaded design handles the constant stress of steering inputs and road shock that comes with farm work. The left-hand thread configuration is engineered to tighten under normal steering operation rather than work loose, which was a common problem with early steering designs. Quality construction ensures this socket will handle years of field use.
Installation Notes
This is a direct replacement for worn steering sockets in manual steering systems. Clean all threads thoroughly before installation and use proper thread engagement to prevent binding. Professional installation is recommended if you’re not familiar with steering system components, as proper adjustment is critical for safe operation and proper wheel alignment.
