RDS Manufacturing 95 Gallon Aluminum L-Shaped Transfer Fuel Tank/Toolbox Combos are made in the USA and are DOT approved for transferring diesel fuel and gasoline. These tanks have fully welded seams and are 100% pressure tested before leaving the manufacturer. Aluminum tanks do not rust, protecting fuel from contamination. The Tank also comes with a GPI 8 GPM 12V transfer pump with 10 ft. of dispensing hose, a manual nozzle, suction tube and an attached 15 ft. power cord for easy installation.
Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.
- The fill cap location and pump location cannot be swapped.
- Do not install risers between the fuel tank fitting and the pump.
- Do not use extension pipes to raise the height of the transfer pump.
- Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.
