When you’re working those spring fields and your disc starts making noise or running rough, nine times out of ten it’s the bearings giving you trouble. A worn bearing can mess up your soil finish and cost you precious time when every day counts. This sealed disc bearing gets you back to smooth operation so you can focus on getting your ground worked properly.
What You’re Getting
- Factory-sealed design that keeps dirt and debris out while holding lubricant in
- Spherical outer race that handles the side loads and tilting forces disc harrows dish out
- Square bore construction that locks tight to your disc gang shaft with no slipping
- 80mm outer diameter that fits a wide range of disc harrow makes and models
- Pre-lubricated and ready to install—no greasing required before use
Built for Real Farm Work
This bearing works on disc harrows from multiple manufacturers including Case, Oliver, and other brands that use the square bore design. Whether you’re running a tandem disc for primary tillage or a finishing disc for seedbed prep, this bearing handles the constant rotation and heavy loads that come with breaking ground.
Made to Last
The sealed construction means you won’t be crawling under the implement with a grease gun every few acres. The spherical design lets the bearing adjust to the natural movement of disc gangs as they follow ground contours, which reduces stress and extends bearing life even in tough conditions.
Installation Notes
This is a direct replacement for several aftermarket part numbers. Make sure to clean the gang shaft thoroughly before installation and check that the square bore isn’t worn or rounded off. A light coat of anti-seize on the shaft makes future removal easier if needed.
