When you’re working heavy clay or running through last season’s corn stalks, your disc bearings take a real beating. Dirt, moisture, and constant vibration can turn a smooth-running bearing into a grinding nightmare that’ll have you wincing every time you turn a corner. This re-lubable disc bearing gets you back to quiet, smooth operation and keeps you running through whatever the field throws at you.
What You’re Getting
- Grease fitting lets you pump fresh grease in and keep dirt out during the season
- 1-1/2 inch square bore fits standard disc gang shafts on most tillage equipment
- 100mm outer diameter provides the load capacity needed for heavy field conditions
- Cylindrical outer race design ensures proper seating in your bearing housing
- Quality AgSmart construction that handles the constant pounding of disc work
Built for Real Farm Work
This bearing fits a wide range of disc harrows and tillage tools that use the standard 1-1/2 inch square shaft. Whether you’re running an older offset disc or a modern vertical tillage machine, this bearing handles the side loads and impacts that come with breaking up tough ground and working through heavy residue.
Made to Last
The square bore design locks onto your gang shaft without slipping, even when you’re pushing through hardpan or hitting the occasional rock. The greasable design means you can keep fresh lubricant flowing to the bearing races, extending life and preventing the kind of catastrophic failure that’ll leave you stranded during planting season.
Good to Know
Before installation, check your gang shaft for wear grooves where the old bearing rode – a worn shaft will quickly destroy your new bearing. Clean out all the old grease and dirt from the housing, and pack the new bearing with quality disc bearing grease before you install it. The grease fitting makes regular maintenance easy, so give it a pump or two at the start of each season.
